Expert Witnesses & Forensic Consultants Directory
Adhesives, Coatings & Paints — United States
Adhesive, coating and paint United States expert witnesses, profiled in this directory, may consult on coating and adhesive failures, waterproofing failures and water leaks, corrosion damage, defective fire-retardant paint coatings and defective application of adhesives and coatings. These professionals may have specialized expertise in waterproof coatings, basement waterproofing, building sealants, crystalline waterproofing, and moisture-resistant coatings, in adhesive bond failures, fire-resistant coating materials and fire-retardant paints, corrosion protection and corrosion resistant coatings. These specialists may provide expert witness opinions in matters of coating or adhesive failure due to defective application, defective manufacture or design defects. These experts may also opine on matters of resins, polymers, industrial coatings, pigments, solvent based paint, lead paint, oil based paint, enamel paint, epoxy paint, latex paint, oil paint, exterior paint, varnish, shellac, lacquer, wood stain, UV coatings, powder coatings and spray painting, as well as paint removers and solvents and paint failures.- United States
- All13
- Alabama3
- Alaska3
- Arizona3
- Arkansas3
- California3
- Colorado3
- Connecticut4
- Delaware3
- District of Columbia3
- Florida4
- Georgia4
- Hawaii3
- Idaho3
- Illinois3
- Indiana3
- Iowa3
- Kansas3
- Kentucky3
- Louisiana3
- Maine3
- Maryland4
- Massachusetts3
- Michigan4
- Minnesota3
- Mississippi3
- Missouri3
- Montana3
- Nebraska3
- Nevada3
- New Hampshire3
- New Jersey3
- New Mexico3
- New York3
- North Carolina4
- North Dakota3
- Ohio4
- Oklahoma3
- Oregon3
- Pennsylvania5
- Rhode Island4
- South Carolina3
- South Dakota3
- Tennessee3
- Texas3
- Utah3
- Vermont3
- Virginia3
- Washington3
- West Virginia3
- Wisconsin3
- Wyoming3
- Canada
About 13 results (0.06 seconds) — Results include first those located in the region, then those who serve in the region.
Robert S. Griswold CRE®, CPM®, CCIM®, RPA®, ACoM®, PCAM®, MCAM®, CCAM®, ARM®
Active, hands-on expert in SOC for management/ownership, RE transactions, fiduciary duty all property types-apartments/ SFD/HOAs/commercial/retail/hospitality-habitability, mold, vermin, bedbug, premises liability, maintenance, trip/slip, wrongful death
Reno, NV
Expert Witness Referrals to Medical, Technical & Scientific Professionals
Expert Witness referrals United States and Internationally. This is a free referral to attorneys, barristers and insurance companies. View full CVs of experts on-line.
Chula Vista, CA
Craig L. Moskowitz, MBA, MS, PE — CLM Engineering Associates, LLC
Civil Engineer, 23 yrs, with extensive construction management experience, commercial and residential, OSHA safety inspections of civilian and military projects, designed drainage systems, cost estimating ($500 million+), delay claims, scheduling, etc.
Stamford, CT
John A. Williams, PhD, PE, ASA, MBA, CFEI, AIChE Fellow
Engineering analysis, forensic investigations, and IP valuation with 40+ years of experience. Dr. Williams provides expert testimony for energy, chemical, and manufacturing disputes, bridging complex technical and financial issues effectively.
South Bend, IN
Charles R. Anderson, PhD — Anderson Materials Evaluation, Inc.
Materials physicist specializes in the characterization, failure analysis, and quality control of surfaces, interfaces, adhesive bonding, thin films and coatings, and bulk material properties using spectroscopy and microscopy analytical techniques.
Columbia, MD
Analytical/Physical Chemist Solving Non-Routine Problems
Expertise in Paints, Coatings, and Adhesives Failure; Laboratory Health and Safety Protocols/Accidents and OSHA Compliance; IAQ and Water Quality Analysis and EPA Compliance; Corrosion and Combustion/Explosion Analysis; Product Liability Issues.
Cumberland, RI
Kenneth B. Tator, PE, KTA-Tator, Inc.
Consulting Engineer specializes in protective coatings and corrosion-related services including failure analysis, steel and concrete fabrication inspection, laboratory analysis, environmental health and safety, facility surveys and expert witness services
Pittsburgh, PA
John F. Malone, President — Galvanizing Consultants Inc.
Experienced in the galvanizing industry and qualified expert witness and arbitrator in all matters pertaining to hot dip galvanizing, zinc rich paint, and facility liability.
Whitsett, NC
M.B. Pasternack & Associates, Inc.
Dr. Pasternack, a recognized coating expert, provides expert witness services for accidents, product defects, paints, coatings, UV/EB coatings, plastics, polyurethanes, chemicals, adhesives, failure analysis, hazardous materials, laboratory testing,
Sarasota, FL
Robert A. Lezzi, PhD
Technical litigation consultant, 49+ yr in paint and metal coatings, corrosion, plastics, plastic additives, pretreatments for metals and plastics, fluoropolymers, intellectual property, patent infringement, Li-ion batteries, composites, extrusion,
West Chester, PA
Areas of Expertise:
Adhesives, Coatings & Paints; Paints, Coatings, & Adhesives
Tel: (610) 344-4856
Limited public information. For more, contact us.
Timothy B. Vander Wood, PhD — MVA Scientific Consultants
Geophysical Scientist expert in microanalysis of small particles related to contamination control, process/environmental monitoring, source identification, including issues with: coatings and industrial minerals; pharmaceutical, chemical, ceramic powders
Duluth, GA
Areas of Expertise:
Paints, Coatings, & Adhesives; Adhesives, Coatings & Paints
Tel: (770) 662-8509
Limited public information. For more, contact us.
G. Fred Willard, PhD — Chemir
Paints, coatings, inks, plastics, adhesives, polymers and related chemicals and materials expert chemist (25+ yr) provides deformulation (reverse engineering), contaminant identification, failure analysis, formulation, etc. and expert witness testimony.
Ypsilanti, MI
Areas of Expertise:
Chemistry
Tel: (888) 772-9000
Limited public information. For more, contact us.
Chemsultants, International Inc.
Experts in adhesives, sealants and specialty coatings (i.e. epoxies, acrylics, urethanes, natural rubber, styrene butadiene, polyvinyl acetates & Pressure Sensitive, Heat activated) . Degreed chemists and engineers; A2LA laboratory accreditation.
Mentor, OH
Areas of Expertise:
Polymers & Plastics
Tel: (440) 974-3080
Limited public information. For more, contact us.